hide

(216) 252-3000

   M-F 9-5 Sat 10-2 EST

http://schema.org/InStock

7111L PAIR

Brand: Avital
Product Code: 7111L-PAIR
Stock: 3
Attachments:
- 7111l-owners.pdf
UPC: 093207094880
MPN: Avital 7111L
Location: Cleveland, Ohio
Avital 1-Button Remote Start Remotes — Pair of Two

Avital 7111L 1-Button 1-Way Remote Controls — Pair of Two — FCC ID: EZSDEI471H. For compatible Avital Avistart 4111L, 4113L, 4115L and 4118L systems using 6102T or 6166T antennas. CR2032 battery type. two genuine Avital 7111L remote controls, brand new. $69.99 for Two Remotes. Programming required.

Price: $69.99

- +

Avital 7111L 1-Button 1-Way Remote Controls — Pair of Two

Replace a missing or damaged transmitter, or keep a spare available, with a genuine Avital 7111L 1-button 1-way remote. Its dedicated remote-start button provides straightforward control of your compatible installed Avistart system.

This listing includes two genuine Avital 7111L remote controls. All supplied remotes are brand new and require programming before use.

$69.99 for Two RemotesGENUINE AVITAL 7111L
Brand-New 1-Button 1-Way Remote Start Transmitter
GENUINE AVITALOriginal manufacturer remote
ONE BUTTONDedicated remote-start control
1-WAYCommand transmitter
BRAND NEWTwo remotes supplied

Avital 7111L Replacement Remote

The actual model supplied is the Avital 7111L. Designed for compatible remote-start installations, its single button keeps operation simple.

What you receive: two genuine Avital 7111L remote controls. System control module, antenna and separate programming switch are not included.

Simple Remote-Start Operation

The 7111L sends commands to a compatible remote-start system. Follow your system owner's manual for the correct button operation. The remote does not add an alarm or remote-start system to the vehicle.

Avital 7111L Product Specifications

7111LRemote Model / MPN
EZSDEI471HFCC ID
1-WAYRemote Type
1 BUTTONRemote-Start Button
CR2032Battery Type per Remote
434 MHzFrequency
UP TO 1/4 MILEAdvertised Ideal-Condition Range
2Included Remote Quantity

Avital 7111L System Compatibility

AVITAL AVISTART
  • 4111L
  • 4113L
AVITAL AVISTART
  • 4115L
  • 4118L
COMPATIBLE ANTENNAS
  • 6102T
  • 6166T

Compatibility: Confirm the installed control module and receiver before ordering. Vehicle year, make and model alone cannot identify the correct aftermarket transmitter.

Programming Required: Use this product's Programming Instructions tab. The programming routine uses the remote's remote-start button.

Owner's Manual: Look for the attachment, usually to the right of the product image.

Video Instructions: Visit the Access 1 Alarm & Audio YouTube channel.

Access 1 Alarm & Audio Cleveland, Ohio's premier mobile electronics shop. Authorized Viper Diamond Dealer serving Cleveland and Northeast Ohio for over 20 years.
10418 Lorain Ave, Cleveland, OH 44111
(216) 252-3000

Avital 7111L Programming Instructions

Use this remote-start learn routine for compatible Avital Avistart 4111L, 4113L, 4115L and 4118L installations.

Locate the programming button: Some installations use a button built into the windshield-mounted antenna or Control Center. Older installations use a separate Valet/Programming pushbutton, usually hidden under the dash.
REMOTE START — ONE PRESS, THEN PRESS AGAIN AND HOLD
1Door. Open the driver's door and leave it open.
2Key. Turn the ignition ON without starting the engine.
3Choose. Within 10 seconds, press and release the Valet/Programming button once.
4Hold. Press the button once more and keep holding it. Wait for the system's programming confirmation, such as an LED flash or horn sound where connected. Do not release the button.
5Transmit. While continuing to hold the Valet/Programming button, press the REMOTE START button on the 7111L. Wait for the system's confirmation that the transmitter was learned.
6Finish. Release the programming button, turn the ignition OFF and allow the system to exit programming mode before testing operation.

Programming a pair: Have both remotes available and complete the supported learning procedure for each transmitter. Both remotes require programming.

This is the remote-start routine. Use the single remote-start button on the 7111L.

If the system does not respond, consult the installation guide for your exact control module before trying again. The owner's manual is usually attached to the right of the product image.

Video support: Access 1 Alarm & Audio YouTube channel.

Remote Control
Works With Antenna(s) 6102T 6166T
Battery Type CR2032
FCC ID EZSDEI471H
Frequency 434Mhz
Range 1/4-Mile
1-Way or 2-Way 1-Way

Visit our shop

hide  10418 Lorain Ave Cleveland, OH 44111

hide Call: (216) 252-3000

hide info@access1alarm.com

Business Hours

hide Mon-Fri --------------------------- 9am - 5pm

hide Sat      ----------------------------- 10am - 3pm

hide Sun     ----------------------------- Closed

Connect With Us

Connect with us and stay up to date on new products and installations