NEW 2026
NEW 2026
Two genuine Avital 7147L remotes — 1-Way 4-Button. FCC ID: EZSDEI7146. Replaces the Avital 7143L and compatible previous-generation 473L, 474L, 476L, 477L and 7133L remotes. Four CR2016 batteries included — two per remote. Actual 7147L supplied with the remote-start icon. $79.99 for two remotes. Programming required.
Replace lost, damaged or nonworking transmitters with two brand-new, genuine Avital 7147L 1-Way 4-Button remote controls. These original Directed Electronics transmitters are designed for compatible compatible Avital vehicle security, keyless-entry and remote-start systems.
The Avital 7147L provides convenient wireless control of supported vehicle functions, including locking, unlocking and remote-start or auxiliary operations, depending on the installed system and configuration.
This listing includes two genuine Avital 7147L remote controls. Four CR2016 batteries are included — two for each remote. Programming is required for both remotes.
The Avital 7147L replaces the 7143L and the previous-generation Avital transmitters listed below when the installed system and receiver support the same transmitter technology.
What you receive: Two genuine Avital 7147L remote controls. The other model numbers above are compatibility references only and are not included. Interchangeability must be confirmed against the installed system and receiver.
The Avital 7147L is an original Directed Electronics 1-Way transmitter, not a generic reproduction or refurbished remote. It is intended for compatible Avital systems requiring this generation of remote-control technology.
Its four-button design provides convenient access to the functions supported by the installed system. The exact operation of each button depends on the vehicle's security or remote-start configuration.
When replacing a previous-generation remote, confirming the original transmitter model and installed receiver is especially important. We recommend matching the FCC ID and system information before purchasing.
The original Avital 7147L is intended for select compatible Avital vehicle security, keyless-entry and remote-start systems. Compatibility depends on the installed control module, antenna and receiver.
System Model Reference: The models above are reference applications associated with this generation of Avital equipment. Confirm the installed receiver and original transmitter before ordering. A system model alone does not guarantee compatibility across every revision.
Original Remote Identification: Check the model number and FCC ID printed on your existing remote control. Matching the original transmitter is the most reliable starting point.
Receiver Compatibility: Different generations of Avital equipment may use different transmitter technology. The installed antenna and receiver determine whether the 7147L can be learned.
Programming Required: Both Avital 7147L remotes must be programmed to a compatible, functioning system before use. Refer to the separate Programming Instructions tab.
Avital has offered several generations of remote controls for vehicle security and remote-start systems. Some earlier-generation transmitters share compatible receiver technology, but matching the Avital brand alone does not establish interchangeability.
When replacing an original remote, identify the model number on the back of the transmitter, check its FCC ID and verify the installed system's receiver. This helps ensure that the replacement can be successfully programmed.
Access 1 Alarm & Audio offers the actual original Avital 7147L as a replacement for the 7143L and compatible previous-generation transmitters.
This listing supplies the Avital 7147L with the remote-start icon. The 7147LS and 7147LSEC versions use an asterisk on that button instead. They are the same remote-control platform with a different button marking.
Prefer the security version without the remote-start icon? Order the Avital 7147LSEC security version here. Available vehicle functions depend on the installed system and configuration.
Original 1-Way 4-Button Remote Control - Directed Electronics Learn Routine
Follow these instructions to program your Avital 7143L remote control to a compatible earlier-generation Avital security, keyless-entry or remote-start system.
Before beginning, locate the vehicle's Valet/Programming Switch. Earlier systems generally use a separate push-button installed beneath the dashboard. Some compatible systems use a programming button integrated into the windshield-mounted antenna or Control Center.
Make sure the security system is disarmed and the status LED has been OFF for at least 60 seconds.
On some older installations, the separate Valet/Programming Switch connects to the control module's BLUE two-pin port using a gray wire and a black wire with a gray stripe.
Have all remotes you intend to use available. Some systems require each transmitter to be programmed during the same learning session.
For compatible earlier-generation Avital remote-start systems using a separate Valet/Programming Switch.
For compatible earlier-generation Avital security-only or keyless-entry systems using a separate Valet/Programming Switch.
For compatible Avital remote-start systems equipped with a windshield-mounted Control Center containing an integrated programming button and status LED.
For compatible Avital security or keyless-entry systems equipped with a windshield-mounted Control Center and integrated programming button.
SEPARATE VALET/PROGRAM SWITCH: Usually mounted beneath the dashboard on earlier-generation systems.
WINDSHIELD CONTROL CENTER: Combines the status LED and programming button in one windshield-mounted assembly.
REMOTE-START SYSTEMS: The procedures above use one press-and-release followed by another press-and-hold.
SECURITY-ONLY SYSTEMS: The procedures above use seven press-and-release operations followed by holding the eighth press.
PROGRAMMING CONFIRMATION: Depending on the installed system, a siren chirp, horn sound or LED flash may confirm successful enrollment.
The Avital 7143L must be programmed to a compatible receiver and control module. Matching the brand name alone does not guarantee compatibility.
Programming sequences may vary by system generation and installed configuration. If your system does not respond as described, consult the installation or owner's manual for your specific Avital control module.
After programming, turn the ignition OFF, allow the system to exit programming mode, and test the supported remote functions.
| Remote Control | |
|---|---|
| Works With Antenna(s) | 544N, 548T, 6102T, 6112T, 6166T, 6213T, A6133T, A6167T |
| Battery Type | CR2016 (X2) |
| FCC ID | EZSDEI7146 |
| IC Number | 1513A-7146 |
| Frequency | 434Mhz |
| Range | 1/4-Mile |
| 1-Way or 2-Way | 1-Way |
Mon-Fri --------------------------- 9am - 5pm
Sat ----------------------------- 10am - 3pm
Sun ----------------------------- Closed
