Excalibur 147 1-Way Remote Control Has Been Discontinued

The Excalibur 147 was a genuine 1-way 4-button remote control transmitter for compatible Excalibur security and remote start systems. Although this model has been discontinued by the manufacturer and is no longer available, the newer Excalibur 1411 provides the recommended replacement for compatible systems.

This remote control is brand new from the original manufacturer, ensuring that you are receiving a genuine product made for compatible Excalibur systems. No knockoffs, no refurbished units and no reprogrammed returns—just authentic Excalibur quality from Access 1 Alarm & Audio, Cleveland, Ohio's premier mobile electronics shop.

Replacement Information

The Excalibur 147 has been discontinued by the manufacturer. The current recommended replacement is the newer Excalibur 1411 1-Way Remote Control.

What You Will Receive

• One Brand New Excalibur 147 1-Way Remote Control Transmitter
• Programming Instructions

Compatible Excalibur Systems

• AL-360-EDP
• AL-1510-EDP
• AL-1650-EDPB
• AL-1660-EDPB
• AL-1860-EDPB
• ATV-1000
• K9-CLASSIC-EDP2
• RS-360-EDP
• RS-360-EDP+
• RS-360-EDPB

Replaces These Excalibur Remote Controls

• 143
• 144
• 145
• 146
• 147
• 148
• 149

Programming Information

Please make sure you have a working control unit installed in the vehicle prior to ordering this remote control. Programming instructions are included with the package and require access to your valet/programming switch.

Standard Programming: This method to program additional or replacement transmitters does not affect the Unauthorized Transmitter Alert (UTA) feature. Before you begin, have all transmitters that are to operate the system at hand.

1. Turn the ignition ON.
2. Within 5 seconds of Step 1, press the Valet Switch 5 times. The siren/horn will briefly sound, confirming that the system is ready to learn a transmitter code.
3. Press the Lock button on the transmitter. The system will chirp the siren/horn once to confirm that the remote was learned.
4. If a code is not received within 10 seconds, the learning process will automatically exit.

Video programming assistance is available through our YouTube channel. If you have any questions regarding compatibility or programming, please contact us before ordering.

Visit Our YouTube Channel

Please contact us if you have any questions regarding compatibility or programming.

Standard Programming: This method to program additional or replacement transmitters does not affect the Unauthorized Transmitter Alert (UTA) feature. Before you begin, have all transmitters which are to operate the system at hand.

1. Turn the ignition “on”.
2. Within 5 seconds of Step 1, press the Valet Switch 5 times. The siren/horn will briefly sound, confirming that the system is ready to learn a transmitter code.
3. Press the “lock” button on the transmitter. The system will chirp the siren/horn once to confirm that the remote was learned.
4. If a code is not received within 10 seconds of Step 2, the learning process will automatically exit.